Erbauer EBPW2400 Mode D'emploi page 31

• Rinse at high pressure using fan spray in a sweeping motion, keeping the nozzle

at least 20 cm from the cleaning surface. Do not use narrow pencil jet on vehicle

or boat paint work.

•

Wipe surface dry for a polished finish.

The golden rules of care

1. Keep the machine clean. Remove debris after each use and before storage.

2. Regular and proper cleaning helps to ensure safe operation and prolongs the life

of the machine.

3. Inspect the machine before each use for worn and damaged parts. Do not operate

it if you find broken and worn parts.

Cleaning

Machine

1. Clean the machine with a slightly damp cloth and mild soap. Use a brush for areas

that are hard to reach.

2. In particular, clean the air vents after every use with a cloth and a brush.

3. Remove stubborn dirt with high pressure air (max. 3 bar).

16:26:44

5063022018885-EBPW2400-PressureWasher-UM-V02.indd 31

96454_IM_Erbauer 2400_EU.indb 31

Care & maintenance

WARNING! Always squeeze the trigger lever (17a) to release the

pressure remaining in the high pressure hose (13) before cleaning,

storage or maintenance.

Always switch the machine off, disconnect it from the socket-outlet and

let the machine cool down before performing inspection, maintenance

and cleaning work!

WARNING! Only perform repairs and maintenance work according to

these instructions! All further works must be performed by a qualified

specialist!.

NOTE: Do not use chemical, alkaline, abrasive or other aggressive

detergents or disinfectants to clean this machine as they might be harmful

to its surfaces.

08-11-2022 16:26:44

2023/3/27 上午10:56