Erbauer EBPW2400 Mode D'emploi page 27

Winding the high pressure hose

1. After use, turn the crank handle (15) clockwise to wind up the high pressure hose (13)

(Fig. 15, step 1).

2. Align the tabs on the crank handle (15) with the grooves on the housing. Slightly

push the crank handle (15) in to lock it in place (Fig. 15, step 2).

3. Fold the crank handle (15).

Using the transportation handle

1. Press the lock-off button (3) to unlock the transportation handle (1) (Fig. 16, step 1).

2. Lift the transportation handle (1) to the desired height position (high/low) (Fig. 16,

step 2).

3. The transportation handle (1) clicks into place, and the lock-off button (3) raises

to its original position (Fig. 16, step 3).

Operation

16:26:44

5063022018885-EBPW2400-PressureWasher-UM-V02.indd 27

96454_IM_Erbauer 2400_EU.indb 27

WARNING! Release the pressure in the high pressure hose (13) before

winding it up:

1. Set the on/off switch (12) to O position (Fig. 13).

2. Press the trigger lever (17a) of the trigger gun (17) repeatedly to

release the pressure remaining in the high pressure hose (14).

WARNING! Do not operate the machine with a closed water tap! This

leads to dry running and subsequently damages the machine!

Kickback forces result from squeezing the trigger lever (17a)! Therefore,

always hold the trigger gun (17) with both hands!

Pay attention to safe posture! Improper handling can lead to injuries!

WARNING! Do not operate the machine when the ambient temperature is

below 0 °C. Water will freeze inside the machine and damage it.

08-11-2022 16:26:44

2023/3/27 上午10:56