Erbauer EBPW2400 Mode D'emploi page 29

4. Holding the trigger gun (17) with two hands, direct the nozzle away from yourself

towards the surface to be cleaned (Fig. 17).

5. Squeeze the trigger lever (17a) (Fig. 18) until water flows from the water outlet (20)

without air bubbles.

6. Set the on/off switch (12) to I position (Fig. 13).

7. Change the operating mode by turning the pressure adjustment knob (17c) on the

trigger gun (17) (Fig. 19).

> Turn the pressure adjustment knob (17c) clockwise for SOFT mode operation.

> Turn the pressure adjustment knob (17c) anti-clockwise for HARD mode

operation.

After use

1. Release the trigger lever (17a) (Fig. 20, step 1).

2. Set the on/off switch (12) to O position (Fig. 20, step 2).

3. Turn the water supply off (Fig. 20, step 3).

4. Squeeze the trigger lever (17a) to allow all water comes out from the machine and

release the pressure still present in the product (Fig. 20, step 4). Flip the trigger

lock lever (17d) down on the trigger lever (17a).

5. Disconnect the power plug (6) from the socket-outlet.

6. Detach the garden hose from the water supply and then from the water inlet hose

adaptor (18).

7. Detach the high pressure hose (13) from the trigger gun (17).

8. Wind the high pressure hose (13) onto the hose reel (14). Do not bend or twist the

high pressure hose (13).

9. Detach the accessories in the reverse sequence of the assembly instructions.

16:26:44

5063022018885-EBPW2400-PressureWasher-UM-V02.indd 29

96454_IM_Erbauer 2400_EU.indb 29

WARNING! Only detach the high pressure hose (13) from the trigger

gun (17) and the garden hose from the water inlet (11) when no more

pressure exists in the system! Ensure that the machine is switched off

and unplugged.

NOTE: The trigger gun (17) is equipped with a trigger lock lever (17d)

(Fig. 21) to prevent accidental activation of the trigger lever (17a). After

use, flip the trigger lock lever (17d) down on the trigger lever (17a).

08-11-2022 16:26:44

2023/3/27 上午10:56