Publicité
Connection to a water supply
1. Connect the water inlet hose adapter (18) to the water inlet (11) (Fig. 12).
2. Connect one end of a suitable garden hose (not included) to the water supply.
3. Connect the other end of the garden hose to the water inlet hose adapter (18).
4. Open the water supply.
.
n
e
e
16:26:44
16:26:44
5063022018885-EBPW2400-PressureWasher-UM-V02.indd 25
5063022018885-EBPW2400-PressureWasher-UM-V02.indd 25
96454_IM_Erbauer 2400_EU.indb 25
96454_IM_Erbauer 2400_EU.indb 25
WARNING! This machine is not intended to be connected to the potable
water mains!
Observe the regulations of your local utility company when connecting the
machine to a water supply line! It is prohibited to connect this machine to
the drinking water facility without a backflow preventer which corresponds
to EN 12729 Type BA or EN 61770! Make sure that the reinforced garden
hose (not included) connected to the water supply and to the machine is
at least 12.7 mm (1/2‟) in diameter.
NOTE: The water inlet hose adapter (18) contains an inlet filter (18b) to
protect the machine against larger particles. Do not use the water inlet
hose adapter (18) without the inlet filter (18b).
25
08-11-2022 16:26:44
08-11-2022 16:26:44
2023/3/27 上午10:56
2023/3/27 上午10:56
Publicité
