Publicité
surface, or drop hard objects
onto it.
Never drag pots and pans
ELECTRICAL CONNECTION
Electrical connections must
be carried out by a trained
technician.
This appliance has a "Y" type
connection, so the power cable
must have a "neutral" wire.
The power cable must be at
least of type H05VV-F. SINGLE
PHASE, TWO PHASE and THREE
PHASE connection: min. cross-
section of wires: 2.5 mm².
External diameter of the power
cable: min. 7 mm - max. 15 mm.
The connection terminals can
be accessed by removing the
junction box cover.
Check that the domestic power
supply characteristics (voltage,
maximum power and current)
are compatible with those of the
appliance.
Connect the appliance as shown
in the diagram (in compliance
FMY 839 HI 2.0 / FMY 839 HI LL KIT
across the vitreous ceramic
surface.
with reference standards in force
nationally for mains voltage).
It is recommended that you use
the H05V2V2-F 5 x 2.5 mm²
power cable. When using the
H05V2V2-F 5 x 2.5 mm² power
cable, follow the instructions
provided here: for three phase
connection, separate the 2 wires
and remove the blue sheathing
from the grey wires.
– 9 –
EN
Publicité
