Publicité
To install utility drawer cover shelf: (see fig. #11)
1. Guide the rear shelf hooks into the desired slots in the metal shelf
supports located on the back refrigerator wall.
2. Tilt up front of the shelf to set the shelf hooks in place.
3. Lower the front of the shelf into position until the rear hooks lock
into the slots of the metal shelf supports. Replace the utility drawer.
Crisper and Crisper Cover
To remove and install the crisper: (see fig. # 12)
1. Slide crisper straight out to the stop.
2. Gently lift the front of the crisper.
3. Grip the crisper firmly and slide out completely.
4. Replace the crisper by placing the crisper properly in its tracks and
gently sliding it back into place.
fig. # 11
fig. # 12
English
14
Publicité
