Publicité
Unpacking
Unpacking
1. Remove all packing materials. This includes the foam base and all adhesive tape
holding the accessories inside and outside.
2. Inspect and remove any remaining packaging, tape and printed materials before
turning ON the freezer.
Note: Allow the freezer to stand in an upright position for at least 24 hours before
turning on the power, if the freezer has been tilted for any reason.
Check to make sure that the accessories are present and in good condition. If you
find that they are not in good condition or are missing, please contact our customer
service department for assistance. Our Toll-Free number is
1-877-337-3639.
English
4
Publicité
