Conrad Voltcraft VC-5080 Mode D'emploi page 49

Transistor test
Range
hFE 0 - 1000
Diode test
Range
IF / IR / LI / LV
Test current max.
Acoustic continuity check, overload protection 250V
Range
Measurement range
Never exceed the maximum input values permitted. Do not touch any circuitry or connection points
when voltages exceeding 33 V/Acrms or 70 V/DC might be applied. Risk of fatal injury!
Accuracy
not specified
Accuracy
not specified
Accuracy
<200 Ω
Note
Test in ohm range x10
Test voltage max. 3.2 Vce
Note
Test voltage is max. 3.2 V
1.5 μA in x100k range
15 μA in x10k range
0.15 mA in x1k range
15 mA in x10 range
150 mA in x1 range
Note
49