Publicité
6.2
General Operation
1.
To switch on the appliance, set the power switch in the on position (I). The device
starts heating up, the airflow (1), temperature (2) and channel (3) are displayed.
Channel 0 is the default channel.
2.
Set the temperature with the temperature arrows. The appliance will slowly warm
up to the set temperature. The temperature is reached as soon as the heating icon
disappears.
3.
Now, set the airflow with the airflow arrows. You will hear the fan speed change
accordingly.
6.3
Setting Up for Operation
Do not force the nozzle or bend its edges with pliers.
1.
Make sure the appliance is switched off and the air gun is completely cooled down.
2.
Select the nozzle matching the IC and slide it onto the air gun.
3.
Switch on the appliance, select the temperature and airflow, and wait for the
heater to be at the set temperature.
6.4
Sleep Mode
Method 1
While holding the air gun, press and hold the green button on the air gun for three
seconds.
Method 2
When the air gun is placed in its cradle, the switched-on station automatically lowers
the iron temperature (sleep mode). As soon as you pick up the air gun, the station exits
the sleep mode.
Note
The sleep mode is the default mode when the appliance is first switched on with the air
gun in the cradle.
V. 01 – 15/01/2019
VTSSD6
6
©Velleman nv
Publicité
