Publicité
Note:
•
Audio receiver must support ARC function.
•
If the device has an Input Selector feature, then make sure to change it to TV.
•
When this port is used for ARC function, it can be used as signal input when a DVD is connected to an
amplifier and the amplifier is connected to the TV at the same time. Some amplifiers may not support
series connection.
5.1 CH (channel) audio is available when the TV is connected to an external device that supports 5.1
•
channel surround sound. You can press
Sound > Audio Output > Digital Audio Out to choose Dolby Audio - Dolby Digital Plus to receive the
5.1 channel audio.
Related information
Select Speakers
on page 36
Connecting a PC
You can connect a PC to the TV with a HDMI cable to use your TV as a PC monitor.
After connecting the PC, press
Note:
•
For better image quality, set the PC's resolution, and make sure the resolution is supported by the TV.
•
If there is no sound from your TV, change the PC's audio settings.
•
If you want to connect your PC and TV wirelessly, please refer to
or
Connecting to External Devices > Sharing your Smart Phone/Computer Screen on the TV
manual.
Connecting to External Devices
button. Select the connected PC as the input source.
button on your remote control to select Settings > Display &
Benefits of Smart TV > Content Sharing
28
in this
Publicité
