Publicité
•
If there is no sound from your TV, configure the device audio settings.
Related information
Use HDMI&CEC
on page 21
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the TV.
When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV volume, and use
your digital audio system to control the volume.
Note:
•
If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to
External Devices > Connecting a Digital Audio System with ARC
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
•
Then go to
> Settings > Display & Sound > Audio Output > Digital Audio Out to choose to select
Dolby Audio - Dolby Digital to receive the Dolby Digital audio.
Related information
Select Speakers
on page 36
Connecting a Digital Audio System with ARC/eARC
If you would like to use the Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC) feature
to send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/
eARC) port of your TV.
By using this feature, you can also control the sound system with your TV remote instead of using the remotes
for each device.
After the connection:
1. Power on the sound system.
2. If the device supports eARC function, press
& Sound > Audio Output > eARC.
Connecting to External Devices
in this manual.
button on your remote control to select Settings > Display
27
Connecting to
Publicité
