Do not operate the appli-
ance on wet surfaces.
Never touch the appliance
or the mains cable/mains
plug with damp or wet
hands.
Use the appliance indoors
only.
Do not expose the appli-
ance to extreme conditions.
Avoid:
– high humidity or wet con-
ditions
– extremely high or low
temperatures
– direct sunlight
– naked flames.
3.1. Initial operation and use
WARNING!
Risk of fire!
Hot surfaces pose a risk
of fire.
To avoid hazards resulting
from an unintentional reset
of the safety temperature
limiter, the appliance must
not be supplied via an ex-
ternal contactor such as a
timer or connected to an
electrical circuit that is regu-
larly switched on and off via
a device.
Place the appliance on a
heat-resistant, dry and level
surface.
Do not place the appliance
on surfaces that can become
hot (e.g. on hotplates, naked
flames).
Ensure that the appliance
does not come into contact
with any other objects dur-
ing use. Maintain a distance
of at least 10 cm from other
objects. Above all, do not set
up the appliance near easily
flammable materials (cur-
tains, drapes, paper etc.).
Do not operate the appli-
ance beneath wall cup-
boards or other objects that
could hinder the free up-
wards flow of steam.
Do not cover the appliance.
Do not place any objects on
the appliance.
Never leave the appliance
unattended while it is in use.
Never use the appliance
near explosive and/or highly
flammable steam.
Always place the hot fryer
pan on a heat-resistant sur-
face.
IT
EN
FR
21