Publicité
Chapter II
5.
GENERAL SPECIFICATIONS
Safety
Mechanical
features
Packaging
Power supply
Max. consumption
Display
Environmental
conditions
EMC
6.
ACCESSORIES
6.1.
Accessories delivered with the power supply
6.2.
Optional accessories
Stabilized power supplies
Compliance with the safety norm:
Insulation class 1
Pollution level: 2
Power supply outputs: Overvoltage category 100 V CAT I in relation to the earth
Mains power supply: Overvoltage category 300 V CAT II
Guaranteed insulation of the outputs from the mains when used at extra low
safety voltage.
AX 501
4 kg
Weight
270 mm x 225 mm x 120 mm
Dimensions
400 mm x 345 mm x 250 mm
For the voltage value, refer to the label on the rear of the power supply.
Two mains ranges: 115 V
AX 501 : 250 VA / AX 502 : 500 VA / AX 503 and « F » : 550 VA
2 displays (3 digits) "VOLTAGE" in green and "CURRENT" in red
7 segments
Digit size: 14.2 mm
Use
Operating not specified for :
over 40°C :
Storage
Coefficient
Relative humidity
Electrical field
Magnetic field
Altitude
Conducted radiation emissions:
NF EN 50081-1
Immunity:
NF EN 50082-1
1 user's manual (5 languages)
20 A / 25 cm safety leads, male / male, red
20 A / 25 cm safety leads, male / male, black
20 A / 50 cm safety leads, male / male, red
20 A / 50 cm safety leads, male / male, black
Green/yellow earth safety lead, female, 2 m
IEC 1010-1 (NF EN 61010-1)
Maximum output voltage: 30.5 V
Supply current: 115 V or 230 V ± 10 % ; 50-60 Hz
AX 502
AX 503 - AX 503F
4.5 kg
6 kg
± 10 % or 230 V
AC
10°C to 40°C
0°C to 10°C and 40°C to 50°C
limit the operating duration to 1 hour
-20°C to +70°C
< 0.1 x accuracy / °C
< 80 % RH up to 40°C
nil
< 40 A / m
< 2000 m
in normal mode
DC
61.0 V
in series mode
DC
± 10 %.
AC
27
Publicité
