Setting The Temperature Setpoint - Intermatic GRASSLIN thermio Mode D'emploi

Setting the temperature setpoint

Personal:
• User
1. Press the toggle key (Fig. 1/3) up or down to activate the heating system.
The toggle key returns to its starting position.
ð
2. To set the temperature setpoint, press either the top button (Fig. 1/6) or the bottom button (Fig. 1/9)
twice in quick succession.
3. Press the top button (Fig. 1/6) to increase the temperature setpoint or the bottom button (Fig. 1/9)
to decrease the temperature setpoint.
4. Once you have set the temperature setpoint, wait five seconds until the setpoint stops flashing.
The device activates the heating system and the room temperature is adjusted to the tem-
ð
perature setpoint.
The temperature setpoint is increased or decreased by 0.5°C/1°F each
time you press a button.
EN
61