Publicité
COMPACT-EX[GD]
ENGLISH
CONTENTS
1. Installation, Operation and Maintenance Instructions for safe use
2. Technical features
3. Installation
4. Creepage and Clearances
5. Servicing and maintenance and repairing
THIS DOCUMENT SHOULD BE READ CAREFULLY BEFORE INSTALLATION
1. INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FOR SAFE USE
1.1 SAFETY RULES
Control Stations type COMPACT-EX[GD] series 593 are designed as Group II Category 2 equipment and is suitable for use for fixed
installation in areas with explosion hazard designated Zone 1 / Zone 2 and Zones 21 / Zone 22.
These operating instructions must be kept in safe place for later consultation. During operation, do not leave these instruction
manual or other objects in the enclosure.
Operate the enclosures type COMPACT-EX[GD] only for their intended duty in the undamaged and clean condition, and only where
the resistance of the material to the surroundings is assured.
The enclosures are designed to withstand an impact of 7 J, and to be used in normal conditions of vibration. They are not designed
for use in areas subject to intentional or extreme conditions of vibration.
Enclosures are made in PA6.
In the event of incorrect assembly, the type of protection will no longer be assured.
Only genuine SCAME spare parts may be used for replacement.
No modifications are allowed to the enclosures that are not expressly mentioned in this instruction manual.
Whenever work is done on the enclosure, be sure to observe the national safety and accident prevention
regulations and the safety instruction given in this instruction manual.
1.2 CONFORMITY TO STANDARDS
The enclosures COMPACT-EX[GD] are designed for Zone 1/21 and Zone 2/22 according to:
• EN IEC 60079-0:2018
• EN 60079-1:2014
• EN IEC 60079-7:2015+A1:2018
• EN 60079-18:2015+A1:2017
• EN 60079-31:2014
• IEC 60079-0:2017
• IEC 60079-1:2014
• IEC 60079-7:2017
• IEC 60079-18:2017
• IEC 60079-31:2013
MP00075
13
13
14
17
19
21
ZP91193-1
Publicité
