General Description - Pentair N80 Instructions De Service

EN
CHAPTER 2
GENERAL INFORMATION

2.1 GENERAL DESCRIPTION

Our expansion tanks are made from AISI 304 stainless steel and come in various sizes - from 8 to 24 litres - that can be configured
vertically or horizontally. They also have legs and a bracket for an electric pump. Most have an interchangeable membrane while some
versions come without a membrane but with an air pump. Tanks with a membrane are precharged at a pressure of 1.5 bar.
2.2 USES
• AISI 304 stainless steel expansion
vessels are designed to be installed
in humid environments for use with
cold and hot water or for heating and
air-conditioning in compliance with
associated limits
• The tank is designed to be used in
systems containing clean water. It
is not designed for use in systems
containing other liquids, nor anti-
freeze or other
TECHNICAL CHARACTERISTICS
The table below details the main technical characteristics of the stainless steel expansion vessel.
VOLUME
MODEL
[L]
N80
N20 24
N24 24
N24H 24
VAA20 24
VAA24 24
CAUTION
The maximum operating pressure must never exceed the value indicated in the service pressure column for the relevant
model.
10
• The main function of the tank is to
maintain system pressure in the event
of small water withdrawals, with the
aim of reducing the number of times
the pump has to be restarted
• Which size vessel to choose depends
on the maximum capacity of the pump
and its speed regulation system (fixed
vs. controlled)
P SERVICE
[BAR]
8 8
8
8
8
8
8
P TEST T SERVICE
[BAR] [°C]
12 0 - 90
12 0 - 90
12 0 - 90
12 0 - 90
12 0 - 90
12 0 - 90
• The version with air pump works
without a membrane by using the
vacuum created by the pump on the
suction outlet
• The air is drawn in from the air pump's
valve and remains trapped in the top
of the tank, creating an air cushion
that allows the tank to function as an
expansion vessel
- FLUID -
PED CATEGORY
FLUID GROUP
WATER / AIR - 2
WATER / AIR - 2
WATER / AIR - 2
WATER / AIR - 2
WATER / AIR - 2
WATER / AIR - 2
I
I
I
I
I
I