Télécharger Imprimer la page

REBER 20130 N Notice D'utilisation Et Entretien page 12

Publicité

UNPACKING
Open the cardboard box, take off the machine in two persons and place on a plane support.
DIRECTIVE 2002/96/CEE
At the end of his working life the product must not be disposed as urban waste. It must be taken to a special local authority differentiated waste
collection center or to a dealer providing this service.
INSTALLATION
The surface where the machine has to be installed must take into consideration the support dimensions. Furthermore, it must be smooth, dry, strong
and with an height from the ground of about 80 cm. and with around the necessary space for use and maintenance.
The machine must be located on a plain surface and positions which can produce the falling of the machine must be avoided.
Environmental conditions :
Minimum temperature +10° - Max. temperature + 38°
Minimum moisture 30% - Max. moisture 80%
ELECTRICAL CONNECTION
Preliminary controls
Before connecting the machine to power supply, take care of the following:
Make sure the socket is provided with a suitable ground protection
-
Make sure that the voltage and frequency of supply correspond to those indicated
-
on the data plate of the machine
To operate, the appliance must be connected to a power point that is always easily
-
accessible during use
Make sure that the way how the power cord is placed will avoid the possibility of
-
sliding and tripping
It is user's responsibility to ensure that the connection of the machine to the electric
-
system is in compliance with the rules in force in the country where the machine is
installed, and to ensure that a correct installation is made by a qualified technician.
Once all preliminary controls done correctly, use the main power switch to start
-
using your machine
Three Phase models : electrical connection to the fixed wiring shall mandatorily be
-
done by a duly qualified technician. A suitable all-pole means for disconnection
must be incorporated in the fixed wiring in accordance with the local wiring rules.
ELECTRIC SCHEMA 230V / 50Hz 20130 N - 20120 N – 20110 N – 20100 N
Internal

Publicité

loading