Publicité
Then, press the power switch again to switch ON the ma-
chine and 20 (Note: Default speed is 20) will be shown on the
digital control display or select a suitable speed by pressing
the desired speed control button: / / will then be shown
on the digital control display correspondingly.
• Select the time for operation (30s / 45s / 90s) by pressing the
timer button. Remaining time will be shown on the digital
control display. Once the set time is elapsed, the machine
will stop operation and go to STANDBY mode.
• After use, always press the power switch to STANDBY mode
and disconnect the plug from the electrical socket.
NOTE! The digital control panel has 2 level for brightness.
When you press, it will be brighter. Otherwise, it will remain in
minimum brightness mode.
Speed selected
Low speed ( )
Speed
control
Medium ( ) and
button
high ( ) speed
Pulse function
Remarks:
1. For the best results when blending solid foodstuffs, only
add small portions in succession, not all ingredients at the
same time.
2. Always start with lower speed (
switch to the high speed ( ) or to the "Pulse" function, so
as not to jam the blade assembly.
3. Do not use this machine to blend hard foodstuff, such as
nuts.
4. Do not fill liquids above the MAX. mark of the jug.
5. Liquids to be blend should be at or below room temper-
ature. If you are going to blend warm liquids, ensure that
the jug lid is correctly in place and use low speed for pro-
cessing. Risk of burns and be careful.
6. Avoid long period of operation due to the loud noise that
may hurt the hearing.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the
power supply and cool down before storage, cleaning &
maintenance.
• Do not use water jet or steam cleaner for cleaning and do
not push the appliance under the water as the parts will get
wet and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness,
this can adversely affect the life of the appliance and result
in a dangerous situation.
• Food residues should be regularly cleaned and removed
from the appliance. If the appliance is not cleaned proper-
ly, it will reduce its lifespan and may result in a dangerous
condition during use.
• DANGER OF INJURY! Care should be taken when handling
the sharp cutting blades during cleaning.
Description
For mixing liquids
For mixing liquids and
solid ingredients
For ice crushing or short,
power impulse movements.
Note: Use the pulse func-
tion for 1 ~ 2 seconds each
time. Repeated about sev-
eral times if necessary.
). If necessary, then
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned
before and after use.
• Avoid water contacting the electrical components.
• Clean the inside of container with a non-abrasive detergent
and rinse with clean water.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Parts
How to clean
- Never immerse this part into
water or other liquids.
Motor
- Using a damp cloth with some
base
detergent and water, rinse, sani-
tize and dry thoroughly.
- Clean it with some water and
Jug, Jug
some mild detergent.
lid and
- Then, rinse off under flowing
Cover cap
water.
- Dry all parts before using again.
- WARNING! Risk of injury! Take
great care when cleaning the
Blade
blades.
assembly
- Clean it with some water and
some mild detergent.
- Dry all parts before using again.
Maintenance
• Check the operation of the appliance regularly to prevent
serious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact
the supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or rec-
ommended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
GB
Frequency
Clean after
each use
11
Publicité
