Publicité
Note: This feature is suitable for music with a strong
rhythm. Otherwise, the LED light may not flash.
EQUALIZER FUNCTION
1. Press the Power button to switch on your speaker.
2. Press the Menu button, then press the Play/Pause
button to enter the EQ selection menu.
3. Press the Next Track or Previous Track button to
select the desired equalizer mode or choose to
configure your own equalizer mode. Then, press
the Play/Pause button to confirm your selection.
The available equalizer modes are: "FLAT", "JAZZ",
"ROCK", "CLASSIC", "POP", "NEWS", and "MY EQ".
4. If "MY EQ" is chosen in step 3, use the Next
track, Previous track and Play/Pause buttons to
subsequently configure the treble, middle and bass
levels.
Note: If you increase the volume while emphasizing the
bass with an equalizer, crackling or distortion may occur.
In this case, adjust the volume.
MICROPHONE SOCKET
A 6.3mm microphone socket is provided on the right
side of your speaker for connecting the microphone (not
supplied).
1. Connect the microphone to the microphone (MIC)
socket.
2. Press the Power button to switch on your speaker.
3. Turn on the microphone.
4. Press the volume up/down buttons on the speaker as
needed to adjust the desired level.
Note:
Do not place the microphone against the speaker, it can
cause feedback echo and it will damage the speaker.
Setting the Microphone volume
1. Press the Power button to switch on your speaker.
2. Press the Menu button, then press the Next Track
button to enter the settings.
3. Press the Next Track or Previous Track button
to select the desired microphone volume level.
Then press the Play/Pause button to confirm your
selection.
PLAYING MUSIC VIA
AUXILIARY INPUT SOCKET
A 3.5mm Auxiliary input socket is provided on the right
Selecting this option indicates
that the LED light will flash with
the rhythm of the music. It is
more effective with music that
has a strong beat.
side of the unit for an audio signal from any devices that
features a headphone or audio output, such as MP3 or
CD player.
1. Connect a stereo or mono audio source (for example,
MP3 or CD player) to the Auxiliary input socket
(marked 'AUX IN'), the speaker will be switched from
Bluetooth to auxiliary input mode.
2. Adjust the Volume control on your MP3 or CD player
to ensure an adequate signal and then adjust the
volume on the speaker for comfortable listening.
Note:
In AUX IN mode, it is recommended to set the volume of
the external audio device to two-thirds or higher. Then,
adjust the speaker's volume as needed to achieve
optimal sound quality. If the volume of the audio device
is set lower than two-thirds, it is possible that the LED
light will not flash.
The display does not show the information such as
title, artist, album, etc., when playing via auxiliary input
socket.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
● Do not wash the speaker with water.
12 ENGLISH
Publicité
