Publicité
ASSEMBLY INSTRUCTIONS
11. After opening the door, make sure the LP tank knob is turned to "OFF". Place the tank in
the tank seat so that it sits securely and is level. Tighten the tank thumb screw to secure
the tank.
a.
b.
12. Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the
collar of the LP gas tank, the regulator valve, the burner
tube, or the burner ports.
Connect the gas line to the tank by turning the connection
knob clockwise. Hand-tighten only.
Disconnect the LP Gas Tank
To disconnect the LP gas tank, make sure the valve on the
LP gas tank is completely closed.
Disconnect the connection knob by turning it counterclockwise
until it is detached from the valve.
12
Publicité
