dB Technologies VIO L1610 Manuel D'utilisation page 55

English
• Slightly lift the line array to verify the correctness of hooks and angles. If necessary, check with a laser
inclinometer (not provided) that the inclination of the fly-bar corresponds to the one in the project. Check
that all the pins have been fully inserted and are locked.
• Remove the brakes from the DT-VIOL210 dolly, close it and remove it.
• Lift the assembled line array with maximum care.
• Implement any other fastening technique necessary for the safe and stable use of the line array, also
considering any atmospheric phenomena it may be exposed to.
WARNING
• Never use the handles, the brackets or other elements of the speaker to directly suspend the
modules or the system!
• In case of outdoor use, it is recommended to anchor the system to prevent any oscillations
due to wind or weather conditions
VIO-L1610
!
Code 420120324 REV. 1.0
55