dB Technologies VIO L1610 Manuel D'utilisation page 54

• Bring the additional 4 modules with a second DT-VIOL210 dolly under the first 4, currently suspended.
• Apply brakes to the dolly and adjust the angles as described in the previous step.
• Remove the cover and the tubes on the front of DT-VIOL210.
• Properly lower the 4 suspended modules and hook them as described in the
both front and rear. Pay careful attention to this step when moving the upper suspended block.
• Complete audio, RDNet and power supply re-link connections as described in the previous paragraphs.
To find the maximum number of power connections in a re-linked system, see the
SPECIFICATIONS
•
VIO-L1610
54
section.
English
MECHANICS paragraph for
TECHNICAL
Code 420120324 REV. 1.0