Publicité
• Check that the product has been
properly assembled before each
use.
Improper assembly can impair the
product's safety and functionality.
• The product must not be used in
adverse weather conditions such
as strong winds, rain or snow.
• Fold up the product if wind speeds
higher than 28km/h are expected
(strong breeze, larger branches
and trees move, and the wind is
clearly audible).
• Pull the protective cover over the
product if the wind picks up or in
other adverse weather conditions.
• Never use the product as shelter
during storms.
• Before opening or closing the
product, ensure that there are no
persons or objects in the opening
or closing areas.
• Check the product for damage or
wear before each use.
The product may only be used if it
is in perfect condition!
Preventing damage to
the product!
• Secure the product during extreme
weather conditions, e.g. strong
wind. Store the product in a
sheltered area.
• Check the product regularly for
visible signs of wear and damage.
Check the screwed connections
regularly.
Important pre-
installation information
WARNING! Before you start
installing the product, measure the
height and depth.
IMPORTANT! Ensure a minimum
distance of 140cm in depth and
140cm + 15cm in height in the
installation area so that you can pull
the protective cover over the product
(Fig. B).
WARNING! Assembling the
product requires at least two people
due to its size.
WARNING! As tools/machinery
need to be used, manual skills are
indispensable.
Suitable installation site
Masonry or a load-bearing timber
beam ceiling are suitable for wall
installation.
Note: alternative installation
conditions require inspection
of load-bearing capacity and
durability by a specialist.
Suitable installation
materials
Before installing the product,
the installation material must be
determined.
If the installation surface is load-
bearing, the appropriate installation
materials for fastening the product
must be selected.
GB/IE/NI
7
Publicité
