Publicité
Checking the battery status
You can check the battery status on the LED indicator
anytime.
Lightly press the ON / OFF switch
shows the current battery status of the power bank
approx. 30 seconds in terms of 4 LED indicators
show overall power bank
1 LED light up = 25 %
2 LEDs light up = 50 %
3 LEDs light up = 75 %
4 LEDs light up = 100 %
This is approx percentage of power bank capacity but
not actual measurement.
Charging mobile devices with the
power bank
Use provided USB type A to USB type C cable
other charging cable purchased from reliable supplier.
Connect USB Type A port to USB output
bank
.
5
And then connect USB type A to USB type C cable
the USB-C port to device to be charged. The charging
process will start automatically.
In case if the charging process does not begin immedi-
ately, press the ON / OFF switch
charging process. The current battery status of the power
bank
is shown during the charging process by the
5
LED indicator
To end the charging process, separate the USB charging
cable from the mobile device and the power bank
5
.
4
. The LED indicator
6
capacity.
2
shortly to begin the
6
4
4
for
5
to
4
or
7
of the power
to
7
.
5
GB/IE
27
Publicité
