Publicité
Thermal energy transfer
Thermal resistance test bench
Ref : 253 118
The fourth and last tab Opt for "Option" is used to set the analog outputs.
3. Objectives
The thermal resistance test bench allows verifying one of Fourier's relations in
thermodynamics as seen above.
The maintained steady state allows working on a single variable, the thermal resistance,
and verifying the tested material thermal conductivity.
The system also provides the opportunity to verify the thermal resistances addition during
the layering of several materials, or the relation between thickness and thermal
resistance of a material.
4. Manipulations
4.1 Materials Classification
We wish to verify the thermal conductivity of different supplied materials.
The most repetitive results are obtained by applying the following program:
ENGLISH
If you wish to associate a result
to an analog output, press SET
to enter the tab menu and use
the rotary encoder to set S1, S2
or S3.
Then press SET.
Use the rotary encoder to
select the desired parameter,
then press SET to validate
17
Publicité
