Publicité
Thermal energy transfer
Thermal resistance test bench
Ref : 253 118
Use either the Back button or the rotary encoder for a different tab.
Grph tab
The third navigation tab Res. for "Results" allows reading the values when the system is
in steady state.
ENGLISH
The Grph tab for "Graph"
allows
following
temperatures progress up to
the expected steady state.
Ta
represents
temperature, T1 that of the
upper block and T2, the lower
block.
To monitor the temperature
evolution in full screen:
Set to T1 or T2 and validate
using the SET button.
Switch from one temperature to
another by pressing SET. Go
back to the menu by pressing
back.
All results are given in the
international system units.
U represents the voltage, I the
current, P the power which is
also the flow, Rth the thermal
resistance and λ the thermal
conductivity.
Time is expressed in minutes /
seconds.
16
the
the
ambient
Publicité
