Publicité
Getting Started
Unpacking
X500 notebook computer
AC adapter
AC power cord
Battery pack
* Optional
NOTE: This packing list applies to standard models.
Select models may have different items.
Installing the Battery Pack
1. Locate the battery compartment on the
right side of the computer.
2. Slide the latch toward the right to unlock
(
) and then push down the latch to
release the cover.
3. With the strip facing outward, insert the bat-
tery pack all the way into the compartment.
4. Close the cover. When closing, engage the
latch and then slide the latch toward the left
to lock (
).
Connecting to AC Power and
Starting Up
You must use AC power when starting up the
computer for the very first time.
1. Plug the DC cord of the AC adapter to the
Screen cleaning cloth
2. Plug the female end of the AC power cord
Stylus*
Tether*
Driver disc*
Document(s)
NOTE: The power cord type varies with countries.
3. Open the top cover by pulling the cover
4. Press the power button (
5. The Windows operating system should start.
power connector of the computer (
to the AC adapter and the male end to an
electrical outlet (
).
latch and lifting up the cover.
When turning on your computer for the very
first time, you will be guided through a setup
process. Follow the onscreen instructions to
complete.
).
) to start up.
1
Publicité
