Zipper Maschinen ZI-GRM400 Manuel D'utilisation page 26

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-GRM400 | ZI-GRM1100 | ZI-GRM1650
6. Remove the spring trough and mount
the finger on the finger plate
(FIGURE6)
7. Mount the finger plate equipped with
fingers back onto the motor shaft
(FIGURE 7). Insert feather key into
the motor shaft, slide on finger plate
and fix with screws (M8x20 LEFT
THREAD!).
8. Place the drum on the machine
(FIGURE 8).
NOTE: The magnet must be
positioned exactly above the
Safety Switch. (note markings).
Fix the drum with the quick-
release fasteners.
Fit out water connection "¾" with
a shut-off valve.
ASSEMBLY
26