Zipper Maschinen ZI-GRM400 Manuel D'utilisation page 25

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-GRM400 | ZI-GRM1100 | ZI-GRM1650
2. Mount the transport wheels on the
axles (FIGURE 2).
3. Mount the feet on the machine
frame (FIGURE 3). Move the long
feet to the side of the motor and
the short foot to the opposite
position.
NOTE: Each stand is only suitable
for one position. Make sure that
the axle holders are parallel to
each other!
4. Assemble axles with transport wheels
(FIGURE 4 & 5).
5. Assemble axles with transport wheels
(FIGURE 4 & 5)
ASSEMBLY
25