Initial Settings - Beeper XONE Manuel D'installation

7. INITIAL SETTINGS

WARNING
If the battery is disconnected (or winter), all the settings made in addition to the initial settings are automatically déprogramment. If you want to reprogram one or more functions,
refer to page 9.
• BACK TO FACTORY SETTINGS •
Factory settings:
Keep the pressure on and press
• Automatic activation of the alarm
• Silent mode
• The sensitivity of the shock sensor returns to the original setting, or the lowest sensitivity.
at the same time 15 times, then release
OFF
OFF
. The buzzer beeps plant 4 times.
25