User Instruction - Beeper XONE Manuel D'installation

4. USER INSTRUCTION

ACTIVATION
Short press the button to activate the alarm.
When the alarm is activated, the siren will beep once and the red LED on the remote lights 5 seconds.
The shock detection is automatically enabled in the next 2 seconds.
The alarm is provided with a Xone impact detection at two levels:
• A first detection, the siren and the remote are 5 beeps.
• If there is a new sensor, siren and remote emit 3 beeps again followed by a long trigger the
siren twice 5 seconds.
Long press the button to activate the alarm without beeps
Only the 2way remote control and the buzzer's central will sound
If there is a shock on your motorcycle, your alarm will operate normally
DESACTIVATION
Short press to disable the alarm:
When the alarm is turned off, the siren will beep 2 times and 2 times flashers are activated and
the LED on the remote lights up in blue.
Long press to disable the alarm without beeps
The main unit buzzer beeps 2 times and the LED on the remote lights blue to indicate that the
alarm is disabled.
Note on the 2 way remote control
• Short press on the remote BIP = (BIP short)
• Long press on the remote BEEP ... BIIIIIIP = (BIP BIP short + long)
21