Publicité
Les langues disponibles
Les langues disponibles
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
Booster [ P ] grant a boost of Power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra-high Power.
This is foreseen for example to heat up rapidly big quantities of water, like noodles cooking.
• Start up / Stop the booster:
Action
Zone selection
Increase power
Start up the booster
Stop the booster
• Power management:
The whole hob is activated with a maximum limit of power. When the booster function is
activated, and in order to exceed the maximum power, the electronic system reduces the power
level of other heating zones. The display will blink on [ 9 ] for a few seconds and then shows the
maximum of power allowed :
Heating zone selected
[ P ] is displayed
Timer
The timer can be used simultaneous with 4 heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.
• Setting and modification of the cooking time:
Action
Zone selection
Increase power
To select "Timer"
Decrease the time
Increase the time
After a few seconds, the control light stops with blinking.
The time is confirmed and the cooking starts until the times reaches [ 00 ]
• To stop the cooking time:
Action
Zone selection
Select « Timer »
To stop the « Timer »
If several timers are activated, repeat the process.
Control panel
Press key [
] from booster zone
Press key [ + ]
Press key [ + ]
Press key [ - ]
The other heating zone:
[ 9 ] goes to [ 7 ] depending the type of zone
Control panel
Press key [
]
Press key [ + ]
Press Simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
press key [
]
press simultaneously [ - ] and [ + ]
press [ - ]
29
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ]
[ 9 ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ]
30, 29 ...
Time increase
Display
[ 0 ]
the remaining time
[ 00 ] then stops
Publicité
