Hilti NURON LS 15-22 Notice D'utilisation Originale page 9

▶ Do not work or spray near children. Keep children away from the product at all times.
▶ Avoid unusual body positions. Keep proper footing and balance at all times.
▶ Remain alert and pay attention to what you are doing.
▶ Do not operate the tool when you are tired or under the influence of drugs or alcohol.
▶ Do not permit the hose to become kinked or bent too sharply.
▶ Do not subject the hose to immoderate temperatures or pressures exceeding the values stated by the
manufacturer.
▶ Do not use the hose as a pulling or lifting device.
▶ Use the product and accessories only when they are in perfect working order.
▶ Check the hose and all connections before each use of the product. A damaged hose or loose
connections can lead to an uncontrolled pressure drop of liquids.
▶ Never heat or modify the hose, the hose nuts or the hose connectors. Otherwise the components and/or
connections can be weakened.
▶ Do not lift, carry or pull the product by the hose. Otherwise the components and/or connections can be
damaged. Carry the product by the grip only and before raising it, make sure that the connections are
correctly secured.
▶ Always comply with the instructions of the chemicals manufacturer and/or the safety data sheet (SDS)
for safe use.
▶ Do not use bleaching agents, caustic (alkaline) self-heating or caustic (acidic) liquids for the product. Do
not pour hot or boiling liquids into the tank of the product. They could cause metal parts of the product
to corrode or could weaken the container and the hose of the product.
▶ Avoid spraying on windy days. The spray jet could be blown on to people, plants or objects that should
not be sprayed.
▶ Do not spray near naked flames, hot surfaces or things that could make the spray evaporate. Otherwise
a hazardous chemical environment can be created.
▶ Make sure you stand far enough away from the object being sprayed to ensure that the spray jet does
not splash back on to you.
▶ Do not eat and do not smoke while working with the product or operating the product. Wash the product
down with hot soapy water after use to reduce the risk of a health hazard due to chemicals.
▶ Never leave the product running while unattended. Always press the OFF button whenever the product
going to be out of use.
▶ When you have finished spraying, thoroughly wash your hands and all the places where your skin has
come into contact with the spray.
▶ Do not store chemicals in the tank of the product. Chemicals can cause degradation of seals and hoses
of the product. Drain and flush the tank of the product after each use, as described in the section headed
"Care and maintenance"
▶ Store or dispose of unused chemicals (formwork oil) in accordance with the instructions of the chemicals
manufacturer, because spillage or leakage can lead to environmental damage, and/or comply with the
regulations for disposal stated in the safety data sheet (SDS).
▶ Remove gloves before touching the batteries of the product. Chemicals are damaging to plastics.
▶ Never tamper with or modify the product or accessories in any way.
▶ WARNING! Failure to follow the correct procedures when using liquid sprayers can be dangerous.
▶ Do not undertake spraying when anyone unprotected is in the danger zone.
▶ Always point the nozzle in a safe direction before putting the product into operation.
▶ Never direct the jet of liquid toward persons, children or living creatures.
▶ Never direct the jet of liquid toward electronic components.
▶ Wear protective gloves when connecting the modules and assembling the product.
▶ Always wear eye protection when using the product. This will prevent injury to the eyes and loss of
sight.
▶ You and all other persons in the vicinity must wear suitable protective gear while the power tool is
in use or while maintenance work on it is being carried out. This includes: eye protection, hard hat,
hearing protection, protective gloves, safety footwear and light respiratory protection.
▶ WARNING! The use of liquid sprayers can result in the formation of aerosols. Inhaling aerosols can
be hazardous to health. Consequently, wear a dust mask.
▶ To prevent contact with or inhalation of harmful aerosols, it is not permissible to use the liquid sprayer
indoors without adequate ventilation.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and
installed accessories are secure.
*2435409*
12. Thoroughly clean the sprayer before putting it into storage.
2435409 English 5