Publicité
Les langues disponibles
Les langues disponibles
Status
One (1) LED shows yellow
One (1) LED quick-flashes red
3.5.2
Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer than three
seconds. The system does not detect a potential malfunction of the battery due to misuse, for example
battery dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4
Technical data
4.1
Product information
Product generation
Weight
Dimensions (L × W × H)
Protection class
Max. capacity
Max. cooling-water temperature
Nominal pressure
Permissible pressure
Nominal flow rate (water)
Maximum flow rate (water)
Ambient temperature for operation
Storage temperature
*2435409*
Meaning
The Li-ion battery and the product in which it is
inserted are not compatible. Consult Hilti Service.
The Li-ion battery is locked and cannot be used.
Consult Hilti Service.
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
01
7.2 kg
(15.9 lb)
(without battery)
360 mm × 262 mm × 580 mm
(14.2 in × 10.3 in × 22.8 in)
IP X4 (protection against splashing water from any
angle)
≈ 12 ℓ
(≈ 3 liq. gal
40 ℃
(104 ℉)
0.8 MPa
(116.0 psi)
0.95 MPa
(137.79 psi)
1.3 ℓ/min
(0.3 liq. gal
2.3 ℓ/min
(0.6 liq. gal
0 ℃ ... 60 ℃
(32 ℉ ... 140 ℉)
0 ℃ ... 70 ℃
(32 ℉ ... 158 ℉)
2435409
)
US
/min)
US
/min)
US
English
9
Publicité
