Stanley SXAE00026 Mode D'emploi page 5

Type of battery:
Mode for charging WET or GEL batteries.
Type of battery:
Mode for charging AGM-START&STOP, AGM-SPIRAL or WET batteries with
temperatures below 5°C.
Reverse polarity: the positive and negative terminals of the outlet lead are not
connected correctly to the battery.
Issue with the battery.
Battery charge level.
Shows the battery voltage, charging voltage, "FUL" when battery is charged and
error indication when issue with battery.
Power supply function: 13.8V – 5A, max. 80 watts.
For WET batteries which have not been used for a long time and in which the acid
has stratified.
2.2. Technical specifications
Reference
Model
Voltage (Mains)
Charging voltage
Charging current
Battery size
Operating temperature
Storage temperature
IP indication
Minimum battery voltage
2.3. Battery types
This electronic battery charger is designed to charge all types of lead batteries, conventional batteries
and batteries of the latest generation. This battery charger is ideal for both everyday use, as a key
working tool, and extensive charging cycles. All charging parameters are set using the charge function
key on the control panel.
2.4. Charge cycles
The charge cycles of the battery charger have been specially developed to optimize the charge of all
types of batteries currently available in the market. The numerous constructional technologies of
currently available batteries require different charging curves to ensure correct and complete
charging. This battery charger extends the lives of your batteries because it provides each with the
proper charge cycle.
SXAE00026 / SXAE00026GB
Charger 12V-8A
220~240V AC 50/60Hz
12V
2A / 8A
5Ah to 250Ah batteries
-10° to +40°C
-20° to +50°C
IP65
0,8V
5
Charging phases up to 9.