Publicité
Minute
5
Each time the "Reset" button is pressed, the "Running time" is added 5 minutes
10
You can choose the "Running time" from 5 minutes to 45 minutes.
6
Each time the "Power" button is pressed, the machine is changed : stop
7
Press the "Power Button" and select the duration for which you wish the ice cream maker to
run. Your ice cream maker will start automatically after 3 seconds. The remaining time left will
then count down on the LCD Display Screen
8
Before adding the mixture you can stop the machine and reset the "Running time" that you want.
THE MACHINE MUST BE SWITCHED ON BEFORE ADDING THE ICE CREAM OR SORBET
RECIPE TO PREVENT THE MIX FROM IMMEDIATELY FREEZING ON THE INSIDE OF THE
INNER BOWL.
9
Use the chute and pour the ice cream or sorbet mix into the inner bowl.
■
When pouring mixture into the bowl, always stop at least 4 cm (1.575 inch) from the top, as the
mixture will increase in volume during freezing.
10
Allow the mixture to churn until frozen or the desired consistency is reached. This can take up
to 20 to 40 minutes, but most recipes will be ready in less time.
11
When the remaining time counts down to the last 30 seconds, the seconds words will flashuntil
there is no remaining time left, and the machine will stop running. Unplug and remove the power
unit/lid. The ice cream is ready to serve.
Important
■
Do not stop and start the machine during the freezing process, as the mixture may freeze in
contact with the bowl and prevent movement of the paddle.
■
To avoid overheating the motor, the direction of rotation will change if the mixture becomes too
thick.
If the direction of rotation continues to change, stop the machine when the mixture is ready.
■
In the unlikely event of the motor overheating, a safety cut out will operate causing the motor to
second
...
40
45
⑥
⑤
5
start
Publicité
