CONTINENTAL EDISON CETI3Z3B3T Guide D'utilisation page 61

4. Adjust cooking power with control buttons "-" or "+", or slide along the track bar
"slider" or just touch anywhere on the track bar "slider".
Or
If you do not adjust the cooking power after one minute, the unit will stop
•
automatically. You will need to repeat the procedure from step 1.
You can change the cooking power at any time during cooking.
•
•
If you drag along the track bar "slider", the power range from the power 2 to
the power 8.
Press "-" power decreases from one step each time until the step 0.
Press "+", the power increases by one step each time until step 9.
If flashes in alternation with the cooking setting that means:
• the pot you use is unsuitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
The cooktop will not heat until a suitable pan is detected on the cooking zone.
The screen automatically turns off after 1 minute if no suitable pan is placed on it.
Shutdown
D.
1. Press the Cooking zone selection button that you want
to turn.
Or
61