shark Navigator LIFT-AWAY ADV LA320 Serie Guide De L'utilisateur page 6

MAINTENANCE
NOZZLE MAINTENANCE
DEBRIS WRAPPED
AROUND BRUSHROLL
Clean off any debris on the bristles. Carefully
use scissors within the brushroll groove to cut
away any hair or debris wrapped around the
brushroll.
CORD MAINTENANCE
To minimize the risk of power cord damage,
DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to
the vacuum and remove the cord from the
brushroll or nozzle.
s h a r kc l e a n . c o m
NOZZLE BLOCKAGES
Check the opening at the top of the nozzle for any
blockages.
1. 1. DO NOT pull or carry vacuum cleaner
by the cord or use cord as a handle..
2. 2. DO NOT unplug by pulling on the cord.
Grasp the plug, not the cord.
3. 3. DO NOT close the door on the cord.
4. 4. DO NOT pull the cord around sharp
corners.
5. 5. DO NOT leave the cord near heated
surfaces.
CHECKING FOR BLOCKAGES
DUST CUP BLOCKAGES
Detach dust cup from vacuum pod. Empty dust
cup and remove debris from lint screen in the top
of the dust cup.
HOSE BLOCKAGES
Detach hose from handle by pressing on the
release button at the top of the hose. Detach
the hose from the pod, and check openings
for blockages.
WAND BLOCKAGES
Detach wand from pod and handle, and check both
ends for blockages.
HANDLE BLOCKAGES
Detach handle from wand and hose to
check the openings on both ends.
s h a r kc l e a n . c o m