Publicité
Les langues disponibles
Les langues disponibles
ABB-Welcome
Settings
Set addresses of the preferred outdoor stations and the address of the indoor station on
the jumper (see chapter "
Three types of installation:
A.
Surface-mounted
1)
Mounted on the wall
1.
Fix the bottom of the device to the wall.
2.
Latch the upper part of the device onto its bottom part: place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
2)
Mounted with flush-mounted box
1.
Fix the bottom of the device to the existing flush-mounted box.
2.
Latch the upper part of the device onto its bottom part : place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
|
Adjusting the device
").
— 36 —
Publicité
