Publicité
4
MOUNTING THE HANDLES
ON THE VALVES
A. For model A,B , thread the
bell (12) onto the body of the hot/cold
valves (15) (19).
For model B mount the handles on
the cartridge broach (15) (19) and fix
them with the screws and put the deco-
rative cap.
B. For model A,B , check the
quarter turn movement of each handle
and verify the position and that each
handle is in good working order.
Products info.: www.aquabrass.com
last revision: 05/23/2013
MODEL A
12
19
HOT
COLD
15
13
12
MODEL B
san remo 8026
Bidet faucet 4 holes
9
AFTER WATER CONNECTION
A. Installer must supply hot and cold water supply connections to the
valves and a trap for the drain.
B. With all the connections made, remove the aerator from the bidet
spray.
C. Turn the water on at the supply. Check all your joints for leaks.
Turn the hot/cold valves on gradually and be careful your bidet spray is
not turned onto spray. Divert slowly back and forth to check your vacu-
um breaker-diverter is working properly from the bidet spray to the bowl.
Hold your hand over the spray when operating. Check all the joints for
leaks. Tighten as needed.
D. Replace bidet spray aerator.
NOTE: When the bidet is diverted to spray mode, the water will
continue to come out of the front hole or the rim of the bidet
body. This is normal and is designed to clean the bowl when in
operation
MAINTENANCE
To clean your AQUABRASS faucet or accessory, wash with a wet non-
abrasive soapy cloth. Then wipe dry with a soft towel or cloth .We
recommend this be done on a regular basis.
DO NOT USE ANY ABRASIVE , CHEMICAL OR CORROSIVE, POWDER
OR ANY OTHER STRONG CLEANERS INCLUDING DETERGENTS, WIN-
DOW CLEANERS AND DISINFECTANTS ON YOUR AQUABRASS PROD-
UCT as they will destroy the finish and therefore VOID THE WARRAN-
TY. Toothpaste remnants should also be rinsed off when necessary.
Ask your plumbing retailer about our PROTECTANT-CLEANER now
available from AQUABRASS. This product is specially manufactured to
clean and polish leaving a protective coating to maintain your products
shine and finish.
INS-SCB1-3-E
4 hole bidet set
robinet de bidet à 4 trous
Updated 21-09-04
aquabrass.com
Publicité
