P
hase 7
: 4th upstroke of the vertical shaft . As the upstroke
starts, orange 3 positioned above the knife. Simultaneously, b
half-oranges are positioned above the cones and half -skins of
orange 1 are ejected to the rear of the machine.
As the u
pstrokes completes, orange 4 is selected.Orange
4 positions then by gravity, waiting at the end of the upper
feeding chute and above the dumper.
This description in 7 steps with empty machines departure is the
most appropriate method to explain the different phases, but when
that each of the oranges 5, 6, 7, 8...will be pressed at each downstroke of the vertical s
Please notice : when cycle is init
Edition du 04-2005
408080 en ma 2014.06
iated : 2 half pressed at each downstroke
1 orange cut at each downstroke
2 half ejected at each upstroke.
.
oth
the cycle is initiated, everyone will notice
R
haft.
10/39
Page 10