Sonos ZoneBridge Guide D'installation page 17

Sonos ZoneBridge Setup Guide
2. If you are making a wired connection, connect a standard Ethernet cable from your
router, another ZonePlayer or ZoneBridge, or a live network wall plate to one of the
Ethernet switch connections on the back of the new Sonos component. If you are
making a wireless connection, skip this step.
3. Attach the power cable (if you haven't already done so), and apply power.
4. Choose one of the following options:
• Using the Sonos Controller, select System Settings→Add a ZonePlayer or
ZoneBridge from the Music menu.
• Using the Desktop Controller software, select Add a ZonePlayer or
ZoneBridge from the Zones menu.
Add a Controller
You should charge your new Sonos Controller when you remove it from the packaging.
Plug it into the power adapter, and then follow the Controller's on-screen prompts to
add it to your music system (you can use the Controller while it is charging.) If you are
prompted to check for updates, please select Yes.
When you see the message Setup Complete, press the OK button located in the
middle of the scroll wheel and you are ready to play some music! Press the Music button
and then choose one of the following options—
11