G
Bottom venting
A
B
* : 4.9" (125 mm)
DV6900B_SimpleUX_WEB_Vent_EN.indd 33
8. Cover the back opening with a cover plate (G).
WARNING
Never leave the back opening uncovered. It must be
covered with a cover plate.
1. Detach the bottom knockout (A).
2. Pull the duct out of the dryer, and then remove the
screw (B) from the duct. Set screw (B) aside. You will
need it in a later step.
3. Cut the duct as shown and keep the cut portion of
C
the duct (C).
English
33
2022/6/7 14:49:29