Installation
C
D
E
F
32
English
DV6900B_SimpleUX_WEB_Vent_EN.indd 32
4. Reconnect the cut portion of the duct (D), and then
fasten it to the ramp on the appliance base with the
screw (C) which you set aside in Step 2.
5. Connect a duct to an elbow, and then tape the duct
and the elbow together with duct tape.
6. Insert the duct with elbow (E) through the rear
opening, and then connect it to the internal duct.
CAUTION
Wire components in the dryer may interfere slightly
with the duct. Do not pull or damage the electrical wires
inside the dryer when inserting the duct.
7. Apply duct tape (F) on all joints as shown.
CAUTION
All joints must be secured with duct tape, otherwise,
they may separate and cause a safety hazard.
2022/6/7 14:49:29