Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION OF MAIN PARTS
1. Backing Pad
2. ON/OFF switch
3. Speed control switch *
4. Dust bag assembly
2
5. Sanding disc
* function depending on the exact model
Intended Use
The orbit sander is designed and may only by used for sanding wood surfaces, sanding steel surfaces and removing rust from steel surfaces. Any other use is
expressly prohibited and is considered misuse. The manufacturer cannot be held responsible for damage or injury caused by misuse of the product.
Technical Data
Model
Rated input power
Rated voltage & frequency
No-Load Speed
Pad size
Oscillating circuit diameter
Power cable
Accessories
2
1
* The manufacturer reserves the right to make minor changes to product design and technical specifications
without prior notice unless these changes significantly affect the performance and safety of the products. The
BSS2450
parts described / illustrated in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be included in the product you
300 Watt
just acquired.
230 V, 50 Hz
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or
12000 rpm
replacement work, including maintenance and special adjustments, must only be carried out by technicians of
the authorized service department of the manufacturer.
125 mm
2 mm
* Always use the product with the supplied equipment. Operation of the product with non-provided equip-
ment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be
2 m
liable for injuries and damages resulting from the use of non-conforming equipment.
Dust bag
3
WWW.NIKOLAOUTOOLS.COM
4
5
EN
Publicité
