Télécharger Imprimer la page

Signature SCA206NFSE Manuel D'utilisation page 42

Publicité

Les langues disponibles

Les langues disponibles

If the capillary tube is damaged by the user the guarantee will be
void.
In some models the handle is put into the appliance, You should
screw it with Your own screwdriver,
Mains connection
This appliance should be connected to AC 220-240V 50Hz supply
scoket. The socket must be fitted properly, and must be supplied
with an earthing conduit and a 10A fuse.
It is a legal requirement that the appliance is properly earthed. The
manufacturer will not be held liable for any damage or injury which
may result from the failure to fulfil this requirement.
Do not use adapters, multiple sockets and two-wire extension leads.
If it is necessary to use the extension lead, it must be equipped with
a protection ring and a single socket and must have a VDE/GS safety
certificate.
If an extension lead is used (with a protection ring and safety certif-
icate), its socket must be located at a safe distance, away from the
sinks, and must not be in a place where in could be flooded by water
or waste water.
See the type plate at the lower part of the internal wall of the appli
ance for detailed specifications**.
Disconnecting the mains
Make sure the appliance can be easily disconnected from the mains,
either by pulling the plug out of the mains socket, or by switching the
two-pole switch of.
- 40 -
EN

Publicité

loading