König Electronic KN-HDMIMAT10 Mode D'emploi page 4

Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the HDMI input source into the Matrix (Input cables are optional)
• Connect the HDMI display devices into the HDMI Output ports.
• Insert the DC side of 5 V power supply into the Matrix and then connect the AC side of the
power supply into the wall outlet.
• Power on all input and output devices.
HDMI output
HDMI output
HDMI output
HDMI output
Warning: If a DVI device does not appear to work, make certain that the device is HDCP
compliant. A non-HDCP compliant DVI device will not work with a signal that has HDCP
encoding present
4x2 matrix switch
4
HDMI Monitor
HDMI Monitor