GE HPS18BTNRBB Manuel D'utilisation Et Instructions D'installation page 13

Installation Instructions
INSTALLING THE DOOR HANDLE
PLASTIC HANDLE
1A
correspond with the handle side (the side
opposite the hinge).
STAINLESS STEEL HANDLE
1B
Attach plastic bushing to the door with the
screw on both freezer and fresh food doors. The
fasteners correspond with the handle side (the
side opposite the hinge).
49-1000394 Rev. 2
Handle Fastener
Bushing
with Screw
2 HANDLE INSTALLATION
up onto plastic bushing or fastener with the
screws at the bottom of the handle.
2. Attach handle to fresh food door by sliding
handle down onto plastic bushing or fastener
with the screws at top of handle.
NOTE: Be sure to remove
if applicable)
BADGE AND PLUG BUTTON
3
INSTALLATION
1. Place a plug button on the opposite side of the
fresh food door across from the handle.
2. Remove the backing on the GE Appliances
badge and carefully place it in the hole
sure the badge is oriented the correct way
before applying it to the door.
Badge
Plug
button
13