Remote Control; Temperature Selector - Uberhaus PC08-AMDII Guide De L'utilisateur

2. Once the set hour has come to an end, the unit will turn off automatically.
3. By pressing the "POWER" key before the time has been reached, the set time will be
cancelled and the unit will turn off.
8. SLEEP CONTROL FUNCTION
1. Sleep comfort mode under cooling setting - the temperature will be increased by 1ºC after 1
hour. Subsequently, the temperature will be increased by 2ºC after 2 hours. It will maintain this
setting without further changes.
2. Under dehumidification mode, no sleep mode can be chosen.
3. Low fan speed setting is default under sleep comfort mode, but can be adjusted
4. Sleep comfort mode under heating setting, the temperature will be decreased by 1ºC after
1 hour. Subsequently, the temperature will be decreased by 2ºC after 2 hours. It will
maintain this setting without further changes.
9. ALARM
When the water tank is full,"E4" will be displayed on the display panel. To resume operation,
please remove the rubber cap of the drain hose to drain out the water. After finishing
draining the water out, please restart the unit and then the unit can operate normally.
7
REMOTE CONTROL FUNCTIONS
The remote control uses two
1.5 VOLTS UM4 AAA CR03
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh,
etc) batteries
type batteries
Stop/Start switch
MODE selector
Hourly programming
Automatic fan speed
High fan speed
Medium fan speed
Low fan speed
Sleep comfort mode selector

Temperature selector

8