shark Rocket AH452W Mode D'emploi page 5

ASSEMBLY
STEP 1
IMPORTANT: Always inspect wires for damage
before assembly.
1 Insert the upper part of the Telescoping
Wand into the lower portion while pressing
the HEIGHT ADJUST button. Make sure not
to pinch the wires.
Push the two parts together until you hear
them click in place.
SELECTING THE CORRECT BRUSHROLL
All-Surface Brushroll
327FFJ452
The All-Surface Brushroll can be used on all
floor types. It is optimized for deep carpet
cleaning.
STEP 2
2 Undo the strap on the Brushroll Holster.
Align the dot on the Brushroll Holster with
the dot on the Telescoping Wand.
Press the Brushroll Holster onto the
Telescoping Wand until you hear a "click".
Wrap the Brushroll Holster Strap around the
Telescoping Wand and press to secure.
1. 8 0 0 . 7 9 8 . 7 3 9 8
STEP 3
3 Open the top of the Brushroll Holster and
insert the spare Brushroll. Close before
using vacuum.
Gentle Touch Hard Floor Brushroll
323FFJ401
Use this Brushroll for enhanced hard-floor cleaning.
4